Pferd Fan Grinder Al Oxide 30 x 30mm 120 Grit 44411126

Pferd Fan Grinder
Fan Grinder Aluminium Oxide Shank
For universal applications from coarse to fine grinding.
Advantages:
High flexibility
High stock removal due to the aggressive coated abrasive
Carrier material wears off uniformly and without residue on the workpiece surface, meaning that sharp abrasive grit is exposed at all times
Due to the flat cast core construction, the face of the mounted flap wheels can be used to work very close to edges and in corners
Recommendations for use
Mounted flap wheels achieve their best performance at a recommended cutting speed of 20 m/s. This provides an ideal compromise between stock removal, surface quality, thermal load on the workpiece and tool wear.
Flexible shafts, electric and air-powered straight grinders can be used as tool drives
Use grinding oil that is suitable for the material in order to significantly increase the tool life and the abrasive performance of the tools.
Safety notes
For safety reasons, it is imperative to remain within the stated maximum permitted rotational speed at all times
Safety is only guaranteed if:
The clamping depth is at least 15 mm
The specified maximum rotational speed for unsupported shank lengths is not exceeded
Materials that can be worked
Aluminium
CopperOther non-ferrous metalsSoft non-ferrous metalBrassStainless steel (INOX)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Annealed cast iron
Hardened, heat-treated steels over 1200 N/mm2 (over 38 HRC)
Steel materials with a hardness over 54 HRC
Steel, cast steel
Steels up to 1200 N/mmΠ(< 38 HRC)
Cast steel
Can be used in
Leveling
Deburring
Surface work
Weld dressing
Structuring (matt finishing, brush matting and satin finishing)
Fine grinding in multiple steps
Drive types
Flexible shaft drive
Straight grinder